Chapter 17. BODY, CAB, AND HOOD GROUP MAINTENANCE

TM 9-2320-209-34-2-2

BODY, CAB, AND HOOD GROUP MAINTENANCE

Section I. SCOPE

17-1. EQUIPMENT ITEMS COVERED. This chapter gives equipment maintenance

procedures for hood and cab components, fenders, running boards, and body com-

ponents and special purpose body components for which there are authorized

corrective maintenance tasks at the direct and general support maintenance levels.

17-2. EQUIPMENT ITEMS NOT COVERED. All equipment items for which corrective

maintenance is authorized at the direct and general support maintenance levels are

covered in this chapter.

HOOD

AND

CAB

COMPONENTS

HOOD SIDE PANELS REMOVAL, REPAIR, AND REPLACEMENT.

TOOLS: No special tools required

SUPPLIES:

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

Clean rags

PERSONNEL:

One

CONDITION: Truck parked, engine off, handbrake set.

EQUIPMENT

Preliminary Procedures.

(1) If working on right, side hood panel, remove air cleaner, cap, and inlet

screen. Refer to TM 9-2320-209-20.

(2) Open hood and side panels. Refer to TM 9-2320-209-10.