Inspection and Repair - TM-9-2320-209-34-2-10561

TM 9-2320-209-34-2-1

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame. Keep a fire extinguisher nearby when sol-

vent is used. Use only in well-ventilated places. Fail-

ure to do so may result in injury to personnel and dam-

age to equipment.

c. C l e a n i n g . Clean crossrod and spring brackets with solvent and wire brush.

Dry with clean rags.

d. Inspection and Repair.

Check that crossrod (1) is not bent or damaged in any other way. Fix small

bends by straightening. If more fixing is needed, get a new crossrod.

2. Check that spring brackets (2) have no bends, cracks or broken welds. Repair

damage by straightening or welding. Refer to TM 9-237. If more fixing is

needed, get new spring brackets.

END OF TASK