|
|
TM 9-2320-209-34-2-1
Take off steering knuckle (1).
1.
Take out 12 studs (2).
2.
NOTE
Do not take out turn angle screw (3) or locknut (4)
unless they are damaged. Refer to para 10-4d for
inspection procedures.
3. Break spot weld on turn angle screw (3) and locknut (4).
4. Loosen locknut (4). Takeout turn angle screw (3) and locknut.
GO TO FRAME 7
10-14
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |