|
|
TM 9-2320-209-34-2-1
Take off steering knuckle (1).
1.
Take out four studs (2) and 12 studs (3).
2.
NOTE
Do not take out turn angle screw (4) or locknut (5) unless
they are damaged. Refer to para 10-4d for inspection procedure.
3. Break spot weld on turn angle screw (4) and locknut (5).
4. Loosen locknut (4). Take out turn angle screw (5) and take off locknut.
GO TO FRAME 4
10-11
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |