 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-209-34-2-1
TOOLS: Mechanical puller kit, pn 8708724
SUPPLIES: Gear cover-to-engine front plate gasket
PERSONNEL: One
EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.
a. Preliminary Procedures.
(1) Open hood. Refer to TM 9-2320-209-10.
(2) Drain cooling system. Refer to TM 9-2320-209-20.
(3) Remove radiator. Refer to TM 9-2320-209-20.
(4) Remove fuel filter. Refer to TM 9-2320-209-20.
(5) Remove oil filter. Refer to TM 9-2320-209-20.
(6) Remove injector lines. Refer to TM 9-2815-210-34.
(7) Remove oil cooler. Refer to para 2-18.
(8) Remove engine cooling fan. Refer to TM 9-2320-209-20.
(9) Remove all drive belts. Refer to TM 9-2320-209-20.
(10) Remove air compressor and air compressor bracket. Refer to
TM 9-2320-209-20.
(11) Remove water pump. Refer to TM 9-2320-209-20.
(12) Remove tappet chamber cover. Refer to TM 9-2815-210-34.
(13) Remove crankcase breather adapter. Refer to TM 9-2815-210-34.
(14) Remove rocker arm cover. Refer to TM 9-2815-210-34.
(15) Remove rocker arm assembly. Refer to TM 9-2815-210-34.
(16) Remove push rods. Refer to para 2-14.
(17) Remove valve tappets. Refer to TM 9-2815-210-34.
(18) Remove vibration damper and pulley assembly. Refer to para 2-8.
(19) Remove tachometer right angle adapter and flexible shaft. Refer
to Tachometer Assembly, TM 9-2320-209-20
(20) Remove injector pump drive gear access cover. Refer to para 2-16.
(21) Remove oil pan. Refer to TM 9-2815-210-34.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version