 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-209-20-3-4
TOOLS: 6-inch pliers
9/16-inch wrench
SUPPLIES: None
PERSONNEL: One
EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.
NOTE
Make sure powerplant heater is off and cool.
a. Removal.
FRAME 1
Using pliers, take out and throw away cotter pin (1).
1.
Using 9/16-inch wrench, unscrew and take off four capscrews with washers
2.
(2), two on each side, while holding oil pan shroud (3) in place.
3. Take down oil pan shroud (3).
END OF TASK
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version