|
|
TM 9-2320-209-20-3-4
j. Replacement of Tachometer.
FRAME 1
1.
Put tachometer (1) through hole in panel (2) from front of panel.
2.
Place clamp (3) over studs (4) and screw on two nuts (5) with lockwashers (6).
3.
Look at front of panel (2) and turn tachometer (1), if necessary, to make sure
it is straight. Using 3/8-inch wrench, tighten two nuts (5).
GO TO FRAME 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |