|
|
TM 9-2320-209-20-3-4
NOTE
Procedure is the same for right mirror and
bracket assembly.
TOOLS :
9/16-inch open end wrench
7/16-inch open end wrench
7/8-inch open end wrench
1/2-inch socket wrench
SUPPLIES :
None
PERSONNEL: One
EQUIPMENT
CONDITION:
Truck parked, engine off, handbrake set.
a.
Removal.
FRAME 1
1.
Using 9/16-inch wrench, unscrew nut (1) from bolt (2).
2.
Take out bolt (2), two lockwashers (3), and two flat washers (4).
3.
Do steps 1 and 2 again at lower end of bracket (5) and take off mirror and arm
assembly (6).
GO TO FRAME 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |