Section III. CAB ACCESSORY ITEMS

TM 9-2320-209-20-3-4

21-4. WINDSHIELD WIPER MOTOR REMOVAL AND REPLACEMENT.

NOTE

This task is the same for both windshield wiper motors.

TOOLS : Cross-tip screwdriver (Phillips type)

Hose clamp pliers

3/8-inch open end wrench

SUPPLIES: None

PERSONNEL: One

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

Removal.

FRAME 1

Unclip wiper blade (1) from wiper arm (2) and takeoff blade.

Using 3/8-inch wrench, unscrew cap nut (3) and take off arm (2).

Using phillips screwdriver, unscrew two screws (4) letting wiper motor (5)

hang on shaft (6).

GO TO FRAME 2