|
|
TM 9-2320-209-20-3-4
FRAME 2
Using 3/4-inch wrench, screw on nut (1) onto rod (2).
1.
Using adjustable wrench, screw on clevis (3) until holes in clevis aline with
2.
holes in arm (4). Using 3/4-inch wrench, tighten nut (1).
3. Put clevis pin (5) throuqh holes in clevis (3) and arm (4). Using pliers, put
cotter pin (6) through hole in clevis pin and bend open ends of cotter pin.
GO TO FRAME 3
19-124
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |