CABLE LEVEL WINDER DRIVE CHAINS REPAIR (TRUCK M764)

TM 9-2320-209-20-3-4

19-19. CABLE LEVEL WINDER DRIVE CHAINS REPAIR (TRUCK M764).

Grinder

TOOLS:

SUPPLIES:

Chain connecting link assembly

PERSONNEL: One

EQUIPMENT

CONDITION: Truck parked, engine off, handbrake set.

a. Preliminary Procedure.

Remove drive chain to be repaired. Refer to

Repair.

FRAME 1

WARNING

Eye shields must be worn when using grinder. Eye

injury can occur if eye shields are not used.

Using grinder, grind off riveted ends of link pins (1) on any link found to

be damaged. Take off keeper (2) and link (3).

Put connecting link (4) through both ends of chain (5).

Put on keeper (6) and clip (7).

NOTE

Follow-on Maintenance Action Required:

Replace drive chain. Refer to para 19-15.

END OF TASK