|
|
TM 9-2320-209-20-3-3
REPLACEMENT (TRUCK M756A2).
NOTE
This task is the same for left and right roller
assemblies. This task is shown for the right
roller assembly.
TOOLS :
Pliers
7/16-inch wrench
3/4-inch open end wrench
1 1/2-inch wrench (2)
3/4-inch socket
SUPPLIES : None
PERSONNEL: T W O
EQUIPMENT CONDITION: Truck parked, engine off, handbrakes set.
a.
Removal.
FRAME 1
1.
Using pliers, pull out and throw away cotter pin (1) .
2.
Using 7/16-inch wrench, unscrew and take off grease fitting (2) .
3.
Using 1 1/2-inch wrenches, hold roller shaft (3) and unscrew and take off
nut (4) and washer (5) .
4.
Take out roller shaft (3) and roller (6) .
5.
Do steps 1 through 4 again to take out rear roller (7) .
GO TO FRAME 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |