Replacement. - TM-9-2320-209-20-3-30495

TM 9-2320-209-20-3-3

If parts are damaged, get new ones.

Check all parts.

Repair.

d. Replacement.

(1) Clamp.

Hold eyebolt (1) in place and put pin (2) through clamp bracket (3) and

eyebolt (1).

Hold clamp (4) in place and put pin (5) through clamp bracket (3) and

clamp (4) . Use hammer to tap pins ( 2 and 5) in place.

Put two cotter pins (6) through holes in pins (2 and 5) . Using pliers,

bend open end of cotter pins.

Swing clamp (4) up so eyebolt (1) goes through hole in clamp.

Put lockwashers (7) and flat washer (8) on eyebolt (1) and screw on

wing nut (9) two or three turns.

END OF TASK