|
|
![]() TM 9-2320-209-20-3-3
1.
Take off tape and put key (1) in place on pump shaft (2).
2.
Working under truck, aline key (1) with slot in drive shaft universal
joint (3) and put pump (4) in place on bracket (5).
3.
Using 9/16-inch wrenches, screw in and tighten four capscrews and self-
locking nuts (6).
4.
Using allen wrench, screw in and tighten setscrew (7) on drive shaft
universal joint (3).
GO TO FRAME 3
18-464
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |