|
|
TM
9-2320-209-20-3-3
M50A1, M50A2, AND M50A3).
NOTE
Truck M50A1 has three discharge valves, one
for each compartment. Trucks M50A2 and
M50A3 have two discharge valves, one for each
compartment. This task can be used for all
valves.
Pliers
TOOLS:
1 3/8-inch wrench
Pick
Discharge valve preformed packing
SUPPLIES:
One
PERSONNEL:
Truck parked, engine off, handbrake set.
EQUIPMENT
CONDITION:
a.
Preliminary Procedures.
(1) Empty water from compartment for discharge valve being worked on.
Refer to TM 9-2320-209-10
(2) Refer to discharge valve removal, para 18-53, for removal of bottom
cover plate under tank section of chassis.
Removal.
b.
FRAME 1
Working under truck and using pliers, take out and throw away cotter pin (1).
1.
2. Slide lever (2) off stem (3).
GO TO FRAME 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |