STATIC REEL ASSEMBLY REMOVAL AND REPLACEMENT (TRUCK M49A1C).

9-2320-209-20-3-3

18-43. STATIC REEL ASSEMBLY REMOVAL AND REPLACEMENT (TRUCK M49A1C).

TOOLS: 9/16-inch open end wrench

5/8-inch open end wrench

SUPPLIES: None

PERSONNEL:

One

EQUIPMENT

CONDITION: Truck parked, engine off, handbrake set.

WARNING

Smoking, sparks or open flame are not allowed

within 50 feet of fuel truck during this task.

Fuel may burn, causing explosion, injury to

personnel, and damage to equipment.

Removal.

FRAME 1

Open truck rear compartment doors.

Take two ground clamps (1) off frame (2).

Using 9/16-inch and 5/8-inch wrenches, unscrew and take out bolt (3) and

nut (4) with lockwasher (5) and flat washer (6).

Take out static reel assembly (7).

END OF TASK