Cleaning and Inspection

9-2320-209-20-3-3

c. Cleaning and Inspection.

WARNING

Dry cleaning solvent is flammable. Do not use

near an open flame. Keep a fire extinguisher

nearby when solvent is used. Use only in well-

ventilated places. Failure to do this may result

in injury to personnel and damage to equipment.

(1) Using scraper, clean off any old gasket material on manifold.

(2) Using stiff brush and solvent, clean inside of manifold.

(3) Check inside of manifold. If there is rust or corrosion, throw manifold

away. Get new manifold in its place.