|
|
TM
9-2320-209-20-3-3
b. Repair.
(1) Repair is limited to the removal and replacement of parts found damaged
during inspection.
(2) Refer to para 18-36 for removal and installation of bearing and journal
universal.
c. Replacement.
FRAME 1
1.
Using hammer, tap key (1) into pump shaft (2).
2.
Put universal joint (3) onto pump shaft (2), lining up keyway. Make sure
universal joint is on pump shaft all the way.
3. Using 3/16-inch allen wrench, tighten setscrew (4).
4. Point yoke (5) to front of truck with wide groove on bottom.
GO TO FRAME 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |