|
|
TM
9-2320-209-20-3-3
b. Replacement.
FRAME 1
1.
Put cable (1) through nut (2). Put cable through hole in valve lever (3) and
back through nut, leaving a loose loop at valve lever. Let about 1/2 inch
of cable end come out of nut.
2.
Put two halves of split screw (4) together around both parts of cable (1) and
screw on nut (2).
3.
Using 5/8-inch wrench, hold split screw (4). Using 5/8-inch wrench,
tighten nut (2).
GO TO FRAME 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |