|
|
TM
9-2320-209-20-3-3
FRAME 3
1.
Put legs (1) onto five channels (2) lining up screw holes for machine screw
(3). Put machine screw through holes in channels and legs and hold with
9/16-inch wrench.
2.
Using 9/16-inch socket wrench, screw on self locking nuts (4) in five places.
Screw them on until they are just snug and do not keep legs (1) from moving
easily.
END OF TASK
18-63
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |