Assembly of Seat Assembly.

9-2320-209-20-3-3

g. Assembly of Seat Assembly.

FRAME 1

NOTE

The top part of boards (1 and 6) have recesses around

the screw holes to bury the screw head. The bottom

part of boards do not have clearance around the screw

holes.

Find top part of outside boards (1). Put five square neck screws (2)

through holes in outside boards so screw heads are on top side. Put

channels (3) onto screws with holes (4) to outside board.

Screw nuts (5) onto five square neck screws (2). If screws do not come

through enough to start nut, use mallet and hammer screws in.

Find top part of outside board (6). Put five square neck screws (7)

through holes in outside slat so screw heads are on top side. Put square

neck screws through screw holes in channels (3).

Put hinges (8) onto five square neck screws (7) with bent part of hinge

to top of outside slat (6).

Screw nuts (9) onto square neck screws (7). If screws do not come

through enough to start nuts, use mallet and hammer screws in.

GO TO FRAME 2