 |
|||
|
|
|||
|
Page Title:
TORQUE RODS REMOVAL AND REPLACEMENT. |
|
||
| ||||||||||
|
|
 TM 9-2320-209-20-3-2
b.
Removal.
FRAME 1
1.
Using 3/8-inch wrenches and screwdriver, unscrew and take
Soldier A
off four capscrews (1) and nuts (2). Spread open and take off
four clamps (3) holding two brake lines (4) on two upper torque
rods (5).
NOTE
On some trucks, there may be plastic ties holding two
brake lines (4) to upper torque rods (5). Using diag-
onal cutting pliers, cut off four ties.
Using 1 7/16-inch socket wrench, unscrew two nuts (6) until
2.
outer side of nut is even with end of upper torque rod end (7).
Hold end of steel punch against end of upper torque rod end (7).
3.
Using sledge hammer, hit end of punch to loosen upper torque
Soldier B
4.
rod end (7).
Using 1 7/16-inch socket wrench, unscrew and take off two
Soldier A
5.
nuts (6).
GO TO FRAME 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version