 |
|||
|
|
|||
|
Page Title:
REAR SPRING SEAT WITH BEARINGS REMOVAL AND REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-20-3-2
1.
Put saddle (1) onto spring (2). Make sure saddle is down on spring. Put U-
bolts (3) over saddle and down into spring seat (4).
2.
Screw on four lockwashers (5) and nuts (6) to U-bolts (3).
Using torque wrench, tighten four nuts (6) to 180 to 230 pound-feet.
3.
NOTE
Follow-on Maintenance Action Required:
1. Replace rear wheels. Refer to TM 9-2320-209-10.
2. Lower and take away jacks under cross shaft and
rear axle housings. Refer to para 11-3.
3. Remove chocks from front wheels.
END OF TASK
17-56
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version