|
|
TM
9-2320-209-20-3-2
Cleaning.
c.
NOTE
This
task
is
for
both
inner
and
outer
wheel
bearing
cones.
WARNING
Dry
cleaning
solvent
is
flammable.
Do
not
use
near
an
open
flame.
Keep a fire extinguisher nearby when
solvent
is
used.
Use only in well-ventilated places.
Failure to do this may
result
in
injury
to
personnel
and
damage to equipment.
NOTE
All old lubricant must be taken off bearings during clean-
ing.
Soak bearing as long as needed to take off all old
lubricant.
1.
Soak
bearing
cone
(1).
2.
Rinse
bearing
cone
(1)
in
clean
solvent.
WARNING
Do
not
dry
bearing
with
compressed
air.
Spinning
bear-
ings
may
explode
and
cause
serious
injury
to
personnel.
3.
Let
bearing
cone
(1)
air
dry.
4.
Using
clean
rags,
wipe
all
old
grease
from
inside
hub
(2).
END
OF
TASK
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |