 |
|||
|
|
|||
|
Page Title:
HANDBRAKE BRAKESHOES REMOVAL AND REPLACEMENT. |
|
||
| ||||||||||
|
|
 TM
9-2320-209-20-3-2
HANDBRAKE
BRAKESHOES
REMOVAL
AND
REPLACEMENT.
5/8-inch
wrench
TOOLS:
3/4-inch
wrench
11/16-inch wrench
1
7/16-inch
wrench
5/16-inch wrench
1
5/16-inch
wrench
7/16-inch
wrench
Flat-tip
screwdriver
Pliers
6-inch
ruler
SUPPLIES:
Spacers
(as
needed)
PERSONNEL:
One
EQUIPMENT
CONDITION:
Truck
parked,
engine
off,
front
wheels
chocked,
handbrake
released.
a.
Removal.
NOTE
On
trucks
with
pipe
going
to
rear
of
truck, pipe must be loosened and pushed away
from brakeshoes.
For trucks with engine
LD-427, refer to Part 1, para 5-5. For trucks
with engine LD-465, refer to Part 1, para 53.
For all other trucks, refer to Part 1, para 5-4.
FRAME 1
1.
Using 11/16-inch wrench, loosen jamnut (1). Using 5/8-inch wrench,
back
Lift spring (3) off screw (2) and unhook it.
off adjusting screw (2).
2.
Using
7/16-inch
wrench,
unscrew
and
take
out
grease
fitting
(4).
Using 5/16-inch wrench, hold nut (5). Using
3/4-inch
wrench,
unscrew
3.
Pull lever (7) off cable
end (8).
and take off nut (6).
4.
Take
off
spring
(9)
from
lever
(7).
GO
TO
FRAME
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version