 |
|||
|
|
|||
|
Page Title:
TRANSMISSION TRANSFER REVERSE SHIFT LINKAGE CHECK |
|
||
| ||||||||||
|
|
 TM 9-2320-209-20-3-1
TRANSMISSION TRANSFER REVERSE SHIFT LINKAGE CHECK.
Jack
TOOLS:
Wood blocks
SUPPLIES: None
PERSONNEL:
Two
EQUIPMENT CONDITION: Truck parked, engine off, handbrake set, rear
wheels chocked.
NOTE
Transfer case must be warmed up to operating
temperature before making checks or adjust-
ments on linkage.
Using jack, raise one front wheel off ground.
Preliminary Procedure.
Refer to para 11-4.
b.
Transmission Transfer Reverse Shift Linkage Check.
FRAME 1
Put FRONT TRANSMISSION shift lever (1) in R (reverse gear).
1.
Soldier A
Turn front wheel (2) backwards and then try to turn it forward.
2.
Soldier B
Wheel should turn backwards but not forward.
Put FRONT TRANSMISSION shift lever (1) in position 1 (first
3.
Soldier A
gear) .
Turn front wheel (2) forward and then try to turn it backwards.
4.
Soldier B
Wheel should turn forward but not backwards.
If front wheel (2) turns forward in step 2 or backwards in step 4,
5.
do adjustment procedure, para 9-6.
NOTE
Follow-on Maintenance Action Required:
1.
Lower front wheel to ground and remove jack.
Refer to para 11-4.
2.
Take away wood blocks from rear wheels.
END OF TASK
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version