LOW AIR PRESSURE BUZZER SWITCH REMOVAL AND REPLACEMENT

TM 9-2320-209-20-3-1

LOW AIR PRESSURE BUZZER SWITCH REMOVAL AND REPLACEMENT.

5/8-inch open end wrench

Flat-tip screwdriver

TOOLS:

7/16-inch wrench

13/16-inch open end wrench

1/2-inch wrench

Tags

SUPPLIES:

PERSONNEL:

One

Truck parked, engine off, handbrake set.

EQUIPMENT

CONDITION:

Preliminary Procedures.

(1) Vent air system pressure. Refer to Part 2, para 13-20.

(2) Disconnect battery ground cable. Refer to para 7-58.

Removal.

FRAME 1

Look at low air pressure switch to see if it is type A or type B.

IF SWITCH IS TYPE A, GO TO FRAME 2.

IF SWITCH IS TYPE B, GO TO FRAME 3