REAR COMPOSITE LIGHT REPAIR

TM 9-2320-209-20-3-1

Cleaning, Inspection, and Repair.

FRAME 1

Using water and mild soap, clean light door (1) and lens.

Check lens for

cracks or other damage.

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame. Keep a fire extinguisher nearby when sol-

vent is used. Use only in well-ventilated places. Fail-

ure to do this may result in injury to personnel and

damage to equipment.

Using solvent, clean all other parts.

Check all screws for stripped or damaged threads.

Check light door (1) and housing (2) for dents, cracks, stripped threads,

or other damage. If any parts of housing are damaged, get a new rear

composite light.

Check gasket (3) for cracks or breaks.

Check lamps (4) for burned out filaments and corroded contacts.

Check electrical connectors (5) for damage.

Throw away damaged parts and get new ones in their placed.

NOTE

Follow-on Maintenance Action Required:

Replace lamps in sockets and light door. Refer to

Replace rear composite light. Refer to para 7-43.

END OF TASK