|
|
![]() TM 9-2320-209-20-3-1
FLOODLIGHT SEALED BEAM REMOVAL, REPAIR, AND REPLACEMENT.
Flat-tip screwdriver
TOOLS:
SUPPLIES:
Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680
Contact cleaner, MS 230
PERSONNEL:
One
CONDITION: Truck parked, engine off, handbrake set, light switch
EQUIPMENT
in OFF position.
a.
Removal.
FRAME 1
1.
Using screwdriver, unscrew and take out three screws (1).
Pull light door (2) with sealed beam (3) away from light body (4).
2.
Using screwdriver, unscrew and take out two screws (6). Take off two
3.
electrical leads (5).
4.
Take off light door (2) with sealed beam (3).
GO TO FRAME 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |