ENGINE STARTER REMOVAL AND REPLACEMENT (TRUCKS WITH PUSH- BUTTON STARTER SWITCH) - continued

TM 9-2320-209-20-3-1

Replacement.

WARNING

Dry cleaning solvent is flammable. Do not use

near an open flame. Keep a fire extinguisher

nearby when solvent is used. Use only in well

ventilated places. Failure to do this may result

in injury to personnel and damage to equipment.

FRAME 1

Put starter adapter gasket (1) over three studs (2) against mounting flange (3)

Straight edge of gasket must be a right side.

Before putting in starter, using solvent,

clean starter adapter (4) and

mounting flange of starter.

Put starter adapter (4) over three studs (2) against gasket (1).

Put starter gasket (5) over three studs (2) and against starter adapter (4).

Straight edge of gasket must be at right side as shown.

GO TO FRAME 2