ENGINE STARTER REMOVAL AND REPLACEMENT (TRUCKS WITH FLOOR PEDAL STARTER SWITCH) - continued

TM 9-2320-209-20-3-1

Replacement.

FRAME 1

Put starter adapter gasket (1) over three studs (2) and against mounting

flange (3). Straight edge of gasket must be at bottom.

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame. Keep a fire extinguisher nearby

when solvent is used. Use only in well-ventilated

places. Failure to do this may result in injury to

personnel and damage to equipment.

Before putting in starter, using solvent, clean starter adapter (4) of starter.

Put starter adapter (4) over three studs (2) and against starter adapter

gasket (1).

Put starter gasket (5) over three studs (2) and against starter adapter (4).

Straight edge of gasket must be at bottom as shown.

GO TO FRAME 2