|
|
![]() TM 9-2320-209-20-3-1
Section III.
STARTING
SYSTEM
STARTER PEDAL AND LINKAGE ASSEMBLY REMOVAL, REPAIR, AND
REPLACEMENT.
7/16-inch socket wrench
TOOLS :
7/16-inch open end wrench
None
SUPPLIES:
PERSONNEL:
TW O
Truck parked, engine off, handbrake set.
EQUIPMENT
CONDITION:
Preliminary Procedures.
a.
(1) Open hood and side panels. Refer to TM 9-2320-209-10.
(2) Disconnect battery ground cable. Refer to para 7-58.
b.
Removal.
FRAME 1
Soldier A
1.
Using 7/16-inch wrench, hold four bolts (1) while soldier B
unscrews locknuts (2).
Soldier B
2.
Using 7/16-inch wrench, unscrew and take off four locknuts (2)
and take off mounting plate (3).
Soldier A
3.
Take out four bolts (1) and lift off pedal assembly (4).
4.
Using 7/16-inch wrench, hold two bolts (5) while soldier B
unscrews locknuts (6).
Soldier B
5.
Using 7/16-inch wrench, unscrew and take off two locknuts (6).
Soldier A
6.
Take out two bolts (5).
GO TO FRAME 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |