RADIATOR REMOVAL AND REPLACEMENT - continued

TM 9-2320-209-20-3-1

Replacement.

Put two shims (1) on two radiator mounting studs (2).

Tape shims (1) to bottom of radiator (3) using short lengths of

masking tape. This will prevent shims from dropping off during

installation.

CAUTION

Be very careful when putting radiator into engine compart-

ment. Core (4) and shroud (5) can be easily damaged.

Soldiers 3. Lower radiator (3) into engine compartment. Radiator mounting studs

(2) must go through holes (6) in bracket (7) as shown.

A and B

GO TO FRAME 2

6-8