THROTTLE CONTROL AND LINKAGE REMOVAL, REPAIR, REPLACEMENT, AND ADJUSTMENT - continued

TM 9-2320-209-20-3-1

Adjustment.

FRAME 1

Soldier A 1.

Push THROTTLE control (1) all the way in. Using foot, push and

hold accelerator pedal (2) hard against stop.

Soldier B 2.

Check that accelerator rod (3) moves toward firewall as shown by

arrow , and that it stays there. Using 6inch scale, measure

distance (4) between end of control cable housing (5) and clip (6).

Slide throttle control cable (7) through floor board until distance (4)

is about 1/2 inch.

Soldier A 4.

Take foot off accelerator pedal (2) .

GO TO FRAME 2