 |
|||
|
|
|||
|
Page Title:
ENGINE MANIFOLD HEATER REMOVAL AND REPLACEMENT (TRUCKS WITH ENGINES LDS 427-2 AND LDS 465-l) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-20-3-1
Screw spark plug (1) with gasket (2) into housing assembly (3). Using
1.
7/8-inch wrench, tighten spark plug.
Using 3/4-inch wrench, screw on and tighten ignition lead with fitting (4).
2.
Using l-inch wrench, screw in and tighten nozzle and valve assembly (5).
3.
Using 5/8-inch wrench, screw in and tighten elbow (6) to position noted.
4.
Put small fuel line (7) into elbow (6) and using 5/16-inch wrench, screw in
5.
and tighten coupling nut (8).
Put large fuel line (9) into nozzle and valve assembly ( 5). Using 9/16-inch
6.
and 7/16-inch wrenches, screw in and tighten coupling nut ( 10).
GO TO FRAME 3
TA 047065
4-92
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version