FUEL PUMP (IN-TANK) BRACKET AND PUMP ASSEMBLY REPAIR - continued

TM 9-2320-209-20-3-1

b. Removal

FRAME 1

Remove lead seal (1) by cutting wire. Discard lead seal (l).

2. Remove three nuts (2) and lockwashers (3), metal tab (4) (if present), and terminal

cover (5) from plate and bracket (6). Discard lockwashers (3).

3. Remove screw (7) and disconnect pump wire (8) from terminal cover (5).

4. Remove nut (9), washer (1 O) and gasket (11) from fuel pump wire (8). Discard gasket

(11) and washer (10).

5. Remove fuse (12) from terminal cover (5).

6. Remove elbow (13) from plate and bracket (6).

7. Remove fitting (14) and "O" ring (15) from plate and bracket (6).

GO TO FRAME 2

NOTE

Record location of mounting hardware for proper installation.