 |
|||
|
|
|||
|
Page Title:
FUEL LINES AND FITTINGS REMOVAL AND REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-20-3-1
(c) Adapter fitting
CAUTION
Fittings are made of soft brass. They can be stripped
very easily if overtightened. Tighten fittings only
enough to stop fuel leaking.
NOTE
Adapter fitting at primary fuel filter on trucks with
LD-465 engine is used for this typical procedure.
Using 7/8-inch open end wrench, screw on and tighten adapter fitting (1).
1.
Using 7/8-inch open end wrench, hold adapter (1). Using 3/4-inch combination box
2.
and open end wrench, screw on and tighten tube nut (2).
NOTE
Follow-on Maintenance Action Required:
1.
Start engine. Refer to TM 9-2320-209-10.
2.
Check that fuel lines and fittings have no leaks,
3.
Stop engine. Refer to TM 9-2320-209-10.
END OF TASK
TA 087076
4-25
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version