FUEL LINES AND FITTINGS REMOVAL AND REPLACEMENT - continued

TM 9-2320-209-20-3-1

(2) Fuel hoses.

CAUTION

Fittings are made of soft brass. They can be

stripped very easily if overtightened. Tighten

fittings only enough to stop fuel leaking.

NOTE

Fuel return hose from secondary and final filter

assemblies to return tube on trucks with LD-465

engine is used for this typical procedure.

Using 9/16-inch open end wrench, hold elbow (1) . Using 11/16-inch

combination box and open end box wrench, screw on and tighten hose

nut (2) .

GO TO FRAME 2

4-21