REPLACING ENTIRE CABLE ASSEMBLY (OTHER THAN THE WINCH CORNER CABLE ASSEMBLY) - continued

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0038 00

UNIT MAINTENANCE

Slowly rotate the winch barrel (1) approximately 1/2 turn in order to position the keyhole (2) located on the

left end plate (3) of the winch barrel (1) at the top.

Install the ball end (4) of the winch corner cable (5) into the keyhole (2) located on the left end plate (3) of

the winch barrel (1).

Have a person wearing gloves hold both the winch corner cable (5) and the right hand cable (6) behind

the winch in order to guide the cables onto the winch barrel (1). Rotate the ratchet handle (7) and begin

taking up the cable onto the winch barrel (1). Ensure that the cable is wound into the grooved recesses

(8) on the winch barrel (1) and that the cable remains in a single layer, each turn parallel to the one

before.

Continue turning the winch barrel (1) until all cable slack is taken up and the cables are taut.

0038 00-18