MOUNTING PLATE THREADED RIVNUT REPLACEMENT

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0037 00

UNIT MAINTENANCE

MOUNTING PLATE THREADED RIVNUT REPLACEMENT

THIS SECTION COVERS:

Replace

INITIAL SETUP:

Personnel Required: One

Maintenance Level - Unit

Materials/Parts

Methylethylketone (WP 0055, Table 1, Item 3)

Tools and Special Tools

Sandpaper (WP 0055, Table 1, Item 8)

General Mechanic Tool Kit (WP 0041, Table 2,

Wiping Rags (WP 0055, Table 1, Item 6)

Item 1)

Light, Incandescent Adjustable With Tripod Base

Masking tape (WP 0055, Table 1, Item 5)

(WP 0041, Table 2, Item 2)

Goggles,Industrial (WP 0041, Table 2, Item 3)

Alodine, Brush (WP 0055, Table 1, Item 12)

Drill,Electric,Portable (WP 0041, Table 2, Item 4)

Adhesive, Two Part Epoxy (WP 0055, Table 1,

Item 9)

Drill Set, Twist (WP 0041, Table 2, Item 5)

Cartridges, 1/10 Gallon, Empty (WP 0055, Table

1, Item 10)

Gloves,Chemical And Oil Protective (WP 0041,

Nozzle, 2 1/2 in long with 1/8 in orifice (WP 0055,

Table 2, Item 6)

Table 1, Item 11)

Gun, Caulking (WP 0041, Table 2, Item 7)

Sheet, Aluminum, .032 inch thick X 12 Inches X

12 inches (WP 0055, Table 1, Item 15)

Header, Hand-Operated (WP 0041, Table 2, Item

Sticks, Mixing (WP 0055, Table 1, Item 14)

11 OR 13)

Gloves, white, cloth (WP 0055, Table 1, Item 19)

Light machine oil (WP 0055, Table 1, Item 1)

Anti-seize Lubricant (WP 0055, Table 1, Item 2)

REPLACE

NOTE

For RIVNUT's which are not potted, knock out RIVNUT and replace with

same type.

Depending on RIVNUT size, select a drill bit in size range listed below:

Install Hole Size (inches)

RIVNUT Thread Size

Drill Size inches (inches)

MIN

MAX

10-32

Letter "E" or 1/4 (.250)

.250

.256

1/4-28

Letter "Q" (.332)

.333

.338

5/16-24

Letter "Z" (.413)

.414

.423

3/8-24

12.5 mm (.492)

.491

.500

0037 00-1