UPPER AND LOWER PERSONNEL DOOR - continued

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0036 00

UNIT MAINTENANCE

installing two washers (one .09 inch thick and one 062 inch thick) (17) under the hinge nearest the door

edge and one additional flat washer (.062 inch thick) (18) under the hinge furthest from the door edge.

Tighten all hardware securely.

To replace the upper personnel door (1), remove the lower door section (2) as described previously and

remove the hex head bolts (13), lock washers (14), and flat washers (15) that secure the door hinges (16)

attached to the upper door (1).

Place the new upper door into position and align the hinge mounting holes. Install the hex bolts (13),

lockwashers (14), and flat washers (15), installing two washers (one .09 inch thick and one 062 inch thick)

(17) under the hinge nearest the door edge and one additional flat washer (.062 inch thick) (18) under the

hinge furthest from the door edge.

Tighten all hardware securely.

0036 00-2