LIFTING/LOCKING ASSEMBLY

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0031 00

UNIT MAINTENANCE

LIFTING/LOCKING ASSEMBLY

THIS SECTION COVERS:

Inspect, Replace

INITIAL SETUP:

Personnel Required: One

Lifiting/Locking Assembly unlocked and

disengaged from corner mounting (WP 0005)

Maintenance Level - Unit

Materials/Parts

Tools and Special Tools

General Mechanic Tool Kit (WP 0041, Table 2,

Item 1)

GENERAL

This procedure contains information and instructions to keep the CBC safe and in good working order by

inspecting and replacing a defective lifting/locking assembly.

INSPECT

Inspect the lifting/locking assembly (1) to ensure that all parts of the assembly function properly and that

there are no cracks or otherwise damaged parts that would prevent the lifting/locking assembly from

operating properly and safely.

REPLACE

To remove the lifting/locking assembly (1), remove the shoulder screw (2) and .032 inch thick x .562 inch

O.D. flatwasher (3) and .065 inch thick x .734 inch O.D. flatwasher (4) that secures the assembly (1) to

the roof (5) of the CBC.

Remove the entire assembly.

Install a new assembly (1) and align the hole (6) on the top of the lifting/locking assembly (1) with the hole

(7) in the CBC roof (5).

Install the shoulder screw (2), .032 inch thick x .562 inch O.D. flatwasher (3) and .065 inch thick x .734

inch O.D. flatwasher (4).

Tighten the shoulder screw (2) securely.

0031 00-1