AIR FILTER

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0030 00

UNIT MAINTENANCE

AIR FILTER

THIS SECTION COVERS:

Inspect, Service, Replace

INITIAL SETUP:

Personnel Required: One

Maintenance Level - Unit

Materials/Parts

Detergent, Mild (WP 0055, Table 1, Item 7)

Tools and Special Tools

Rags, Wiping (WP 0055, Table 1, Item 6)

GENERAL

This procedure contains information and instructions to keep the CBC safe and in good working order by

inspecting and replacing the air filter as required.

INSPECT

Inspect the condition of the air filter (1) to ensure that it is not dirty, clogged, or damaged in such a way as

to impair the free flow of air into the CBC.

SERVICE

To clean the air filter (1) reach up under the ventilator port opening (2) and grasp the air filter material with

both hands.

Pull the air filter (1) straight down while moving from left to right.

Continue until the filter (1) has been completely removed from the ventilator port (2).

Wash the air filter material in clean, mildly soapy water until clean.

Allow the air filter to dry before replacing it in the ventilator.

If the air filter is very dirty and cannot be cleaned satisfactorily, replace it with a new filter.

REPLACE

Remove old air filter (1) as instructed above.

Replace with a new air filter by feeding one end of the filter up under the ventilator port (2) and pushing

upwards. Be sure that the filter remains straight and does not fold while being pushed into position.

Continue to push the air filter up into the ventilator port until the entire air filter is securely in place.

0030 00-1