|
|
TM 10-5411-233-13&P
CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0029 00
UNIT MAINTENANCE
LIFTING RINGS
THIS SECTION COVERS:
Inspect, Replace
INITIAL SETUP:
Personnel Required: One
Maintenance Level - Unit
Materials/Parts
Tools and Special Tools
General Mechanic Tool Kit (WP 0041, Table 2,
Item 1)
GENERAL
This procedure contains information and instructions to keep the CBC safe and in good working order by
inspecting and replacing the lifting ring assembly as required.
INSPECT
Inspect the lifting ring (1) to ensure that there are no cracks or other damage that could cause the lifting
ring to fail upon lifting the CBC.
REPLACE
To replace any of the four lifting rings (1), remove ten hex head bolts (2), lockwashers (3), and flat
washers (4) securing the lifting ring assembly to the CBC.
Remove the defective lifting ring.
Install a new lifting ring (1) in position on the CBC and align mounting holes (5).
Install 10 flat washers (4), lock washers (3), and hex head bolts (2) in the corresponding mounting hole
positions.
0029 00-1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |