SIDE WALL REPAIR OF PUNCTURE WITH MINIMAL DAMAGE TO CORE

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0019 00

UNIT MAINTENANCE

SIDE WALL REPAIR OF PUNCTURE WITH MINIMAL DAMAGE TO CORE

THIS SECTION COVERS:

Repair

INITIAL SETUP

Personnel Required: One

Maintenance Level - Unit

Materials/Parts

Methylethylketone (WP 0055, Table 1, Item 3)

Tools and Special Tools

Sandpaper (WP 0055, Table 1, Item 8)

General Mechanic Tool Kit (WP 0041, Table 2,

Wiping Rags (WP 0055, Table 1, Item 6)

Item 1)

Light, Incandescent Adjustable With Tripod Base

Masking tape (WP 0055, Table 1, Item 5)

(WP 0041, Table 2, Item 2)

Goggles,Industrial (WP 0041, Table 2, Item 3)

Adhesive, Two Part Epoxy (WP 0055, Table 1,

Item 9)

Drill,Electric,Portable (WP 0041, Table 2, Item 4)

Alodine, Brush (WP 0055, Table 1, Item 12)

Drill Set, Twist: W/25 Components And Metal Box,

Cartridges, 1/10 Gallon Empty (WP 0055, Table 1,

Numbered Series (WP 0041, Table 2, Item 8)

Item 10)

Drill Set, Twist (WP 0041, Table 2, Item 5)

Nozzle, 2 1/2 In Long With 1/8 In Orifice (WP

0055, Table 1, Item 11)

Gloves,Chemical And Oil Protective (WP 0041,

Sheet, Aluminum, .032 Inch Thick X 12 Inches X

Table 2, Item 6)

12 Inches (WP 0055, Table 1, Item 15)

Gun, Caulking (WP 0041, Table 2, Item 7)

Rivet, Blind, 1/8 Inch Dia. (WP 0055, Table 1,

Item 13)

Riveter, Hand Blind with 1/8 inch nosepiece (WP

Sticks, Mixing (WP 0055, Table 1, Item 14)

0041, Table 2, Item 9)

Router, Electric, Portable (WP 0041, Table 2, Item

10)

REPAIR

NOTE

The following procedure covers repair of puncture in any shelter panel

skin with minimal core damage (damaged area not exceeding 14 square

inches (90.3 square cm). Use hand router to cut patches and openings.

WARNING

Safety goggles must be worn during repair to protect eyes from flying

metal chips. Failure to wear proper eye protection may result in eye

injury and/or blindness.

0019 00-1