|
|
TM 10-5411-233-13&P
CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0018 00
UNIT MAINTENANCE
SIDE WALL REPAIR OF DEPRESSION OR SMALL PUNCTURE
THIS SECTION COVERS:
Repair
INITIAL SETUP
Personnel Required: One
Maintenance Level - Unit
Materials/Parts
Methylethylketone (WP 0055, Table 1, Item 3)
Tools and Special Tools
Sandpaper (WP 0055, Table 1, Item 8)
General Mechanic Tool Kit (WP 0041, Table 2,
Wiping Rags (WP 0055, Table 1, Item 6)
Item 1)
Light, Incandescent Adjustable With Tripod Base
Masking tape (WP 0055, Table 1, Item 5)
(WP 0041, Table 2, Item 2)
Goggles,Industrial (WP 0041, Table 2, Item 3)
Adhesive, Two Part Epoxy (WP 0055, Table 1,
Item 9)
Drill,Electric,Portable (WP 0041, Table 2, Item 4)
Alodine, Brush (WP 0055, Table 1, Item 12)
Drill Set, Twist (WP 0041, Table 2, Item 5)
Cartridges, 1/10 Gallon Empty (WP 0055, Table 1,
Item 10)
Gloves,Chemical And Oil Protective (WP 0041,
Nozzle, 2 1/2 In Long With 1/8 In Orifice (WP
Table 2, Item 6)
Gun, Caulking (WP 0041, Table 2, Item 7)
Sticks, Mixing (WP 0055, Table 1, Item 14)
REPAIR
NOTE
The following procedure covers repair of a depression or small puncture
in any shelter panel skin (depression exceeding 2 square inches (12.9
square cm) or deeper than 0.25 inch (6.4 mm), but not larger than 4
square inches (25.8 square cm) or puncture not larger than 1 square
inch (6.5 square cm).
WARNING
Safety goggles must be worn during repair to protect eyes from flying
metal chips. Failure to wear proper eye protection may result in eye
injury and/or blindness.
0018 00-1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |