FINAL INSTALLATION OF CLAMP PLATE ASSEMBLIES

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0014 00

UNIT MAINTENANCE

FINAL INSTALLATION OF CLAMP PLATE ASSEMBLIES

Clamp plate assemblies (5) are installed on either side of the mounting plate assembly (2) and work in

conjunction with the tie down post assemblies to secure the CBC/mounting plate combination to the

vehicle bed.

When the CBC is in its final position, install two 1/2-13 UNC x 4.5 inch hex head bolts (3) through the

holes in the clamp plate channel (1).

Install a spacer block (4) and clamp plate assembly (5) onto the bolts (3) and secure with 1/2 inch flat

washer (6) and 1/2-13 UNC hex locknut (7). Be sure that the side of the clamp plate assembly (5) with the

rubber pad (8) engages securely on the underside of the truck bed (9).

Repeat for the second clamp plate assembly located on the opposite side of the CBC.

Tighten all clamp plate assembly hardware securely.

Once the CBC has been properly secured to the vehicle, the Cargo Bed Cover is ready to be used as

detailed in WP 0005 entitled "OPERATION UNDER USUAL CONDITIONS".

END OF WORK PACKAGE

0014 00-21/(22 Blank)