SECURING THE TIEDOWN POST ASSEMBLIES

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0014 00

UNIT MAINTENANCE

SECURING THE TIEDOWN POST ASSEMBLIES

To secure the tiedown post assemblies, tighten the two bolts (1) located at the top of each tie down post

assembly (2).

When the two top bolts of each tie down post assembly are secure, install one bottom plate (3) to the

bottom of each tie down post assembly (2) from the underside of the vehicle bed (4). Place the vehicle

bed plug (5) over the bottom plate (3) and align the hole in the plug with the hole in the bottom plate (this

is done simply to secure the plug). Secure the plug (5) and bottom plate (3) to the base of the tie down

post (2) using one flatwasher (6), lockwasher (7), and 3/8-16 UNC x 2 inch long bolt (8). Tighten securely.

Repeat for the remaining tie down post assemblies.

Install the pin (9) that previously secured the vehicle bed plugs into the side of the tie down post

assemblies.

0014 00-20