APPLYING RTV SEALANT TO THRESHOLD AREA

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0013 00

UNIT MAINTENANCE

APPLYING RTV SEALANT TO THRESHOLD AREA

Once the CBC has been lowered into position and secured to the vehicle bed, RTV sealant must be

applied around the threshold area (1) at the rear of the CBC.

To apply sealant around the threshold area, start at the left corner (2) of the CBC and inject sealant (3)

under the area where the threshold (1) meets the vehicle bed (4). Fill the area sufficiently to create a

good weather seal.

Continue to apply a bead of sealant all along the edge of the threshold (1) at the point where it meets the

vehicle bed (4). Be sure to apply sealant around the hinge pivot pin area (5). Continue around the right

corner (6) of the CBC and inject sealant under the right side of the threshold (7) as was done with the left

corner.

Install Ladder. Install the ladder onto the inside surface of the M35A2, 2 1/2 T Cargo Truck tailgate as

detailed in WP 0016 entitled "Ladder Installation".

END OF WORK PACKAGE

0013 00-12