SERVICE UPON RECEIPT

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0010 00

SERVICE UPON RECEIPT

prior to removing the mounting kit container from the shipping palette (1).

INSTALLATION OF MOUNTING KITS

The Cargo Bed Cover is designed to be used on three different types of vehicles, the M35A2, 2 1/2 T

Cargo Truck, the M1078, 2 1/2 T LMTV, and the M1082, 2 1/2 T LMTV Trailer.

Each type of vehicle requires that a different mounting kit be installed BEFORE the CBC can be mounted.

Refer to the table below to determine what mounting kit is required for each vehicle type. Also included in

the table is a reference to the Unit Maintenance work package that describes the installation of that

particular mounting kit.

The M35A2, 2 1/2 T Cargo Truck also requires the application of a Ladder Installation Kit. The Ladder

installation may be applied before or after the installation of the CBC onto the M35A2 Cargo Truck. The

M1078, 2 1/2 T LMTV and the M1082, 2 1/2 T LMTV Trailer do not require the installation of a ladder.

Refer to WP 0016 entitled "LADDER INSTALLATION" for complete information on the installation of the

ladder assembly on the M35A2, 2 1/2 T Cargo Truck.

Table 1. Vehicle Type and Mounting Kit Reference

Mounting Kit

TM Work Package Describing Installation

Vehicle Type

M35A2, 2 1/2 T Cargo Truck

17-1-0050-1

M1078, 2 1/2 T LMTV

17-1-0221-1

M1082, 2 1/2 T LMTV Trailer

17-1-0222-1

END OF WORK PACKAGE

0010 00-2